| Details |
CROSROL OPENING & CARDING (1998)
(No. 1) Synthetic Hopper Blending Opener
1.500 mm wide with 5.0 meters feed table, including
electrical control panel.
(No. 1) Pinned Opener and Cleaner
1.500 mm wide with fully pinned opening roller, including electrical control panel.
(No. 1) Double Magnet Trap-with hump back
(No. 1) Dust Remover
1.000 mm wide with integral fan for separating fibres.
(No. 1) Transport Fan
Fully variable speed (with inverter) for feeding chute feeds, including electrical control panel and pressure controller.
(No. 2) Crosrol MK5 B High Production Single Card
Card manager system with electronic auto-leveller, changing speeds with inverters,40”automatic can changer, anti-static bar, airodinamic doors, chute feed, production up to 100kg.
(No. 1) Crosrol MK5 D High Production Single Card (1999)
Card manager system with electronic autoleveller, changing speeds with Inverters, 40”automatic can changer, anti-static bars, aerodinamics doors, chute feed, production up to 100kg.
(No. 1) Crosrol CPO 12 Filter
To provide a total capacity of 12.000 cfm (20,400 m3/ hr) extraction.
DRAW FRAMES
(No. 1) VOUK DRAW FRAME TYPE SH801/4 (1998)
Up to 8 cans feed creel, production speed up 800 m/min, automatic can change, delivery can 40”, air suction filter, electronic display counter.
(No. 1) VOUK DRAW FRAME TYPE SH 801/DCC –E (1998)
Up to 8 cans feed creel, with USTER SLIVERCONTROL, production speed up to 800 m/min, automatic can change delivery 18” can, air suction filter, sypnotic panel of all stoppages.
(No. 1) VOUK DRAW FRAME UNIMAX-R (1999)
Up to 8 cans feed creel, with USTER SLIVER CONTROL USG, delivery can 14”, automatic can changer, display with all control information, air suction filter.
(No. 1) SEDO DRAW FRAME TYPE SM-870-ASC WITH T&G (1997)
This draw frame has two deliveries separated by a gauge ,one is first pass with up to 8 cans feed creel and delivery can 24” ,Automatic can changer, electronic display counter. sypnotic panel with identification of all stoppages, air suction filter.
Second exit is up to 8 cans feed creel, with USTER SLIVERCONTROL USG, delivery can 14”,automatic can changer, sypnotic panel with identifications of all stoppages, air suction filter.
(No. 1) CHERRY HARA SHOKKI DRAW FRAME TYPE DX 500
This draw frame has two exits, up to 8 cans feed creel, control unit, automatic can changer, sypnotic panel with identification of all stoppages, air suction filter.
RING SPINNING
(No. 2) SUESSEN RING SPINNING MACHINES
TYPE RINGCAN 1.000
(14.000 running hours) (1997)
Each machine has 864 spindles, linked with MURATA link coner Nº 7- VSS with USTER POLYMATIC inside, automatic doffer, cut-cats, inverters, display control units, automatic doffers and ELECTRO -JET blowers.
(No. 1) SUESSEN RING SPINNING MACHINE
TYPE RINGCAN 1.000
With 96 spindles, ELECTRO-JET blower. (1992) |
